|
|
See details
|
EDELBROCK® 55-86 SMALL BLOCK CHEVY PERFORMER AIR GAP INTAKE
SKU: EDE2601
PERFORMER AIR-GAP (idle-5500 rpm)
Designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance in the idle to 5500 rpm range. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along with the solid idle to 5500 rpm performance makes this an ideal choice for street rods and street machines. No provision for exhaust heated chokes or exhaust crossover. Fits spread-bore or square-bore carburetors.
|
 $225.95 |
|
|
|
|
|
|
|
|
See details
|
EDELBROCK® 55-86 SMALL BLOCK CHEVY PERFORMER EPS INTAKE
SKU: EDE2701
PERFORMER EPS (idle-5500 rpm)
Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs. of torque for more performance where you need it most. Look for the Performer EPS to "up the standards" in dual-plane intake manifold design. Match with a dependable Edelbrock® square-bore carburetor for maximum performance gains.
|
|
$139.95 |
|
|
|
|
|
|
|
|
See details
|
EDELBROCK® 55-86 SMALL BLOCK CHEVY PERFORMER INTAKE
SKU: EDE2101
PERFORMER - '86 & EARLIER (idle-5500 rpm)
Designed for street 1955-86 262-400 c.i.d. small-block Chevys. Edelbrock® #2101 is stock replacement/street legal part for 302, 327 and 350 V8s with OEM 4-bbl. or Edelbrock® #1400 carb; 1966-72 (1973 non-California) cars, 1966-83 trucks and Suburbans; except stock equipped EGR. #3701 is stock replacement/street legal part for 305, 350 and 400 V8s with OEM 4-bbl. or Edelbrock® #1400 carb.; 1972-86 and GM corporate engines with 350 V8s; 1981-86. Performers accept late-model choke, waterneck, air-conditioning, alternator and H.E.I. Has provisions to add oil fill tube. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads. Available with standard finish or polished.
|
|
$134.95 |
|
|
|
|
|
|
|
|
See details
|
EDELBROCK® 87-95 SMALL BLOCK CHEVY WITH CAST IRON HEADS
SKU: EDE2104
PERFORMER - FOR 1987-95
CAST IRON CYLINDER HEADS (idle-5500 rpm)
Designed for street 262-400 c.i.d. Chevy V8s that have heads with canted center bolt holes. #2104 is stock replacement/street legal part for 302, 327, 350 V8s with OEM 4-bbl. carb.; except stock equipped EGR. Accepts late-model waterneck, air-conditioning, alternator, H.E.I. and have rear water crossovers. Accepts exhaust-heated chokes. Will not fit stock aluminum, Chevrolet® Bowtie or LT1 heads.
|
|
$209.95 |
|
|
|
|
|
|
|
|
See details
|
PROFESSIONAL PRODUCTS® 55-95 SMALL BLOCK CHEVY CROSSWIND™, POLISHED
SKU: PRP52025
The new CrossWind Manifold is a special version of the 52020/52021. While it is the exact same height, it features an open area under the plenum chamber. This provides for a flow of cooling air which keeps the temperature of the air/fuel charge lower thus producing more power and torque. The interior plenum and port design are identical to the 52020/52021 and will provide somewhat better overall power than the 52020/52021 due to the special air gap style design. RPM range: 1500-6500
|
|
$209.95 |
|
|
|
|
|
|
|
|
See details
|
PROFESSIONAL PRODUCTS® 55-95 SMALL BLOCK CHEVY, CYCLONE™, POLISHED
SKU: PRP52000
The Cyclone™ manifold is the ideal street manifold. It is street legal on a wide range of applications and provides significant increases in power and torque. The Power+Plus Cyclone Manifold is a direct replacement for the stock manifold on 1957 - 95 Small Block Chevy non-EGR engines. Includes special adapter bushings to fit '87 - '95 engines. Use the stock Quadra-Jet carb or 500-650 cfm vacuum secondary carburetor. Kit includes adapter plate to permit use of certain square bore style carburetors. Power+Plus Manifolds are cast from steel molds, not from sand molds. Permanent molds provide a tighter grain casting thereby reducing the occurrence of porosity, which can mar the polished finish. Additionally, each Power+Plus Manifold is 100% pressure tested for leaks to eliminate installation problems. RPM range: Idle - 5500.
|
|
$159.95 |
|
|
|
|
|
|
|
|
See details
|
PROFESSIONAL PRODUCTS® 55-95 SMALL BLOCK CHEVY, CYCLONE™, SATIN
SKU: PRP52001
The Cyclone™ manifold is the ideal street manifold. It is street legal on a wide range of applications and provides significant increases in power and torque. The Power+Plus Cyclone Manifold is a direct replacement for the stock manifold on 1957 - 95 Small Block Chevy non-EGR engines. Includes special adapter bushings to fit '87 - '95 engines. Use the stock Quadra-Jet carb or 500-650 cfm vacuum secondary carburetor. Kit includes adapter plate to permit use of certain square bore style carburetors. Power+Plus Manifolds are cast from steel molds, not from sand molds. Permanent molds provide a tighter grain casting thereby reducing the occurrence of porosity, which can mar the polished finish. Additionally, each Power+Plus Manifold is 100% pressure tested for leaks to eliminate installation problems. RPM range: Idle - 5500.
|
|
$124.95 |
|
|
|
|
|
|
|
|
